THESI320

▪ THESI 320 position controller can control shifting and positioning of two axes in 3 different operating modes:
  - MANUAL, by keyboard;
  - SEMI-AUTOMATIC, by keyboard;
  - AUTOMATIC, on the basis of a memorized program.
▪ End of program output.
▪ Independent axes as for configurations and parameters.
▪ 3 generic auxiliary inputs.
▪ Possibility of storing up to 99 PROGRAMS with 20 positions each. Up to 99 repetitions can be matched to each position
  (the program cycle is composed by the position and its respective repetitions).
▪ 90 Vac to 230 Vac power supply or 24 Vac power supply with selector.
▪ Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory in single-chip mode.
▪ Optoisolated inputs:
  START, STOP, INCREASE CYCLE, DEVIATION, PRESET.
▪ Voltage-free contact outputs:
  ENABLING WITH CONTROL INTERLOCK, OK POSITION, FEED / BACK, SLOW / FAST.
▪ ± 10 Vdc analog outputs:
  FEED / BACK, SLOW / FAST, with linear ramp.
▪ Possibility of installation on bench or built in.

THESI 320 DI   With relay outputs (digital)
Display POSITION: 6 high-efficiency digits
h = 13 mm and negative sign
CYCLES / PROGRAMS:
2+2 high-efficiency digits h = 13 mm
Encoder input signals 2 square waves with phase displacement
of 90° ± 10° and zero ref.
5 Vdc or 12 Vdc
Axes input frequency 20 kHzMAX
Linear resolution 200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 μm
Protection class keyboard IP 65   rear panel IP 40
Power 10 WMAX
Power supply 90 to 230 Vac ± 10% - 50/60 Hz
24 Vac ± 10% - 50/60 Hz
Digital outputs N.O. relay contacts
Inputs optoisolated
Connections by removable terminal block
Dimensions front panel: 193x100 mm – depth: 135.5 mm


THESI 320 AN   With analog outputs        
Display POSITION: 6 high-efficiency digits
h = 13 mm and negative sign
CYCLES / PROGRAMS:
2+2 high-efficiency digits h = 13 mm
Encoder input signals 2 square waves with phase displacement
of 90° ± 10° and zero ref.
5 Vdc or 12 Vdc
Axes input frequency 20 kHzMAX
Linear resolution 200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 μm
Protection class keyboard IP 65   rear panel IP 40
Power 10 WMAX
Power supply 90 to 230 Vac ± 10% - 50/60 Hz
24 Vac ± 10% - 50/60 Hz
Analog outputs ± 10 Vdc optoisolated
Inputs optoisolated
Connections by removable terminal block
Dimensions front panel: 193x100 mm – depth: 135.5 mm


Линкове на нашите партньори

За нас

Фирма Бендис Инженеринг ЕООД гр. Куклен обл. Пловдив е еднолично дружество с ограничена отговорност.

Поддържате връзка в:

    

Контакти

За обща информация относно Бендис Инженеринг ЕООД, моля свържете се с нас на:
  Този имейл адрес е защитен от спам ботове. Трябва да имате пусната JavaScript поддръжка, за да го видите.
  00359 32 210 128
  00359 877 942 703