AEN58

? Compact-design absolute rotary encoder, based on optical principle.
? Singleturn resolution up to 17 Bit.
? Multiturn resolution up to 12 Bit.
? High accuracy and stability of signals.
? Linearity ± ½ LSB (± 1 LSB for resolutions > 13 Bit).
? Serial interface (SSI-BiSS, with or without 1 Vpp analog signal), Fieldbus
  (CANopen, Profibus, DeviceNet) or Parallel.
? Several flanges available.
? IP 67 protection class available.
? Aluminium flange and body.
? Axial or radial output (with connector or cable).
? High rotational speed (up to 12,000 rpm).
? Diagnostics: warning, LED indication, temperature measurement, alarm bit.

EN58

? Incremental rotary encoder, based on optical principle.
? Small overall dimensions for applications with limited installation space.
? Wide range of pulses per revolution up to 64,000 ppr.
? Bidirectional signals with zero references, TTL or 1 Vpp sine wave.
? Output by connector or cable, radial or axial position.
? Aluminium flange and body.
? High-protection ring.
? High accuracy and stability of signals.
? Protected against inversion of power supply polarity and short circuits on output ports.
? Wide range of features.
? Custom-made features on request.

EN38

? Compact-design incremental rotary encoder, based on optical principle.
? Output by sealed cable in radial or axial position.
? High degree of robustness. Aluminium flange and body.
? High accuracy and stability of signals.
? Protected against inversion of power supply polarity and short circuits on output ports.






ACCESSORIES

SEP   Encoder support
Encoder support for the realization
of a rack and pinion system.
Material aluminium
Coupling guaranteed by an elastic spring system
Max. opening - closing
To be used with encoder mod. EN536 - AEN536 - others on request
Weight 300 g



















WS04   Wire system, measuring length 4,000 mm
Material aluminium / brass / stainless steel
Cable stainless steel AISI316 (7x19+0 covered)
Measuring length 4,000 mm
Max. extension 4,010 mm
Measuring length per turn 200 mm
Static tension min. 3 N   max. 8.9 N
Max. acceleration 35 m/s2 (output)   10 m/s2 (recovery)
Max. speed 1 m/s
Protection class IP51


WS08   Wire system, measuring length 8,000 mm
Material aluminium / brass / stainless steel
Cable stainless steel AISI316 (7x19+0 covered)
Measuring length 8,000 mm
Max. extension 8,010 mm
Measuring length per turn 250 mm
Static tension min. 6 N   max. 13 N
Max. acceleration 30 m/s2 (output)   12 m/s2 (recovery)
Max. speed 0.75 m/s
Protection class IP51


WS10   Wire system, measuring length 10,000 mm
Material aluminium / brass / stainless steel
Cable stainless steel AISI316 (7x19+0 covered)
Measuring length 10,000 mm
Max. extension 10,010 mm
Measuring length per turn 300 mm
Static tension min. 6 N   max. 13 N
Max. acceleration 25 m/s2 (output)   12 m/s2 (recovery)
Max. speed 0.75 m/s
Protection class IP51



Coupling   HELI-CAL
Dimensions
(D x L)
Hole diameter
(d1 0 ÷ 0.05)
Fixing Max. Torque
20x20 mm 6 mm 4 screws M3 1.1 Nm
20x20 mm 8 mm 4 screws M3 1.0 Nm
25x24 mm 6 mm 4 screws M4 2.9 Nm
25x24 mm 8 mm 4 screws M4 2.6 Nm
25x24 mm 9.52 mm 4 screws M4 2.2 Nm
25x24 mm 10 mm 4 screws M4 2.2 Nm


Coupling   SPRING
Dimensions
(D x L)
Hole diameter
(d1 0 ÷ 0.05)
Fixing Max. Torque
16x35 mm 6 - 8 - 10 mm 2 screws M4 1.0 Nm
 
 
 
 
 


Coupling   CTFX
Dimensions
(D x L)
Hole diameter
(d1 0 ÷ 0.05)
Fixing Max. Torque
19x26 mm 6 - 8 - 10 mm 2 screws M4 1.4 Nm
 
 
 
 
 


Coupling   PGFX
Dimensions
(D x L)
Hole diameter
(d1 0 ÷ 0.05)
Hub
diameter (d)
Fixing Max. Torque
26x28 mm 6 - 8 mm 18 mm 2 screws M3 0.3 Nm
48x48 mm 10 - 12 mm 25 mm 2 screws M4 1.3 Nm
 
 
 
 


Coupling   OLDHAM
Dimensions
(D x L)
Hole diameter
(d1 0 ÷ 0.05)
Fixing Max. Torque
25.4x29 mm 6 - 8 - 10 mm 4 screws M4 1.0 Nm
 
 
 
 
 



SV200   Metric wheel circumference 200 mm
Wheel circumference 200 mm
Weight 320 + 100 g
Wheel material aluminium
Cover material smooth or knurled rubber
Accessories supporting arm
(for encoder mod. EN536, AEN536)


SV500   Metric wheel circumference 500 mm
Wheel circumference 500 mm
Weight 320 + 280 g
Wheel material aluminium
Cover material smooth or knurled rubber
Accessories supporting arm
(for encoder mod. EN536, AEN536)


SV200H   Metric wheel circumference 200 mm
Wheel circumference 200 mm
Weight 135 g
Wheel material synthetic
Cover material smooth or knurled Hytrel
Accessories supporting arm
(for encoder mod. EN536, AEN536)


SV500H   Metric wheel circumference 500 mm
Wheel circumference 500 mm
Weight 260 g
Wheel material synthetic
Cover material smooth or knurled Hytrel
Accessories supporting arm
(for encoder mod. EN536, AEN536)


 Sam Martin Authentic Jersey

EN413

? Compact-design rotary encoder, based on optical principle.
? Bidirectional signals with reference index.
? Up to 500 pulses per revolution.
? High accuracy and stability of signals.
? Zamak flange and body.
? Cable output in radial position.





EN30

? Compact-design incremental rotary encoder, based on optical principle.
? Output by sealed cable in radial or axial position.
? High accuracy and stability of signals.
? Protected against inversion of power supply polarity and short circuits on output ports.

VN413

? Incremental bidirectional encoder which allows to manually vary axis shifting typically on CNC operating machines.
? Up to 3,600 pulses per revolution.
? Absolute version available, with Parallel, SSI, CANopen, Profibus-DP interfaces, up to 17 Bit.
? Cable output (in radial position) or terminal board.
? Available with round flange (VN413FT) or with square flange (VN413FQ).
? Knob available in silver or dark grey color.

Линкове на нашите партньори

За нас

Фирма Бендис Инженеринг ЕООД гр. Куклен обл. Пловдив е еднолично дружество с ограничена отговорност.

Поддържате връзка в:

    

Контакти

За обща информация относно Бендис Инженеринг ЕООД, моля свържете се с нас на:
  Този имейл адрес е защитен от спам ботове. Трябва да имате пусната JavaScript поддръжка, за да го видите.
  00 359 31 272 207
  00359 877 942 703