GVS215

▪ Optical incremental scale with glass measuring support. Particularly suitable for applications on
  synchronized press brakes.
▪ Reader head guided by a self-aligned and self-cleaning sliding carriage with spring system.
▪ Resolution up to 0.1 μm.
▪ Accuracy grade ± 2.5 μm in the standard version and ± 1 μm in the high-accuracy version.
▪ Metrological certificate provided with each scale.
▪ Reference indexes at coded distance or selectable every 10 mm along the entire measuring length,
  with Zero Magneto Set device.
▪ The adjustable cable output and the selectable zero references make the scale SYMMETRIC and
  applicable to both columns of the press brake.
▪ Safety limit switches, positionable at both ends.
▪ Sealing lips for the protection of the grating, made of special elastomer resistant to oil and wearing.
▪ Various possibilities of application, with double-effect joint or steel wire. An adapter guarantees the
  compatibility with PBS-HR scale.
▪ High accuracy and stability of signals even in case of high speed, strong accelerations and vibrations.
▪ Moulded M12 connector (IP 67) or other models on request.
▪ Protected against inversion of power supply polarity and short circuits on output ports.

GVS219

▪ Absolute optical scale with glass measuring support. Particularly suitable for applications on
  synchronized press brakes.
▪ Serial interface SSI-BiSS, with or without 1 Vpp analog signal.
▪ Reader head guided by a self-aligned and self-cleaning sliding carriage with spring system.
▪ Resolution up to 0.1 μm.
▪ Accuracy grade ± 2.5 μm in the standard version and ± 1 μm in the high-accuracy version.
▪ SSI protocol and programmable resolutions.
▪ Profibus-DP, Profinet, CANopen, DeviceNet, ModBus and DRIVE-CLiQ protocols, through
  conversion gateways.
▪ Metrological certificate provided with each scale.
▪ Sealing lips for the protection of the grating, made of special elastomer resistant to oil and wearing.
▪ Various possibilities of application, with double-effect joint or steel wire. An adapter guarantees
  the compatibility with PBS-HR scale.
▪ High accuracy and stability of signals even in case of high speed, strong accelerations and vibrations.
▪ Protected against inversion of power supply polarity and short circuits on output ports.

MTS

▪ New line of magnetic sensors MTS, with small overall dimensions.
▪ Resolutions up to 0.5 μm programmable (Pr) via serial line. DPI resolution and inches reading now available.
▪ Many pole pitches available.
▪ Wide alignment tolerances and sensor/magnetic band distance up to 12 mm, for an even easier and faster mounting.
▪ Reference indexes in required positions (with magnetic bands MP200Z, MP500Z and MP600Z).
▪ Magnetic sensor body made of die-cast metallic material.
▪ Fixing of magnetic sensor by existing threaded holes M4, or by M3 through screws.
▪ Protected against inversion of power supply polarity and short circuits on output ports.





MTR

▪ Miniaturized magnetic sensor MTR. Resolutions up to 0.5 µm programmable (Pr) via serial line.
▪ Remote interpolation unit.
▪ Magnetic sensor body made of die-cast metallic material.
▪ Fixing of magnetic sensor by existing threaded holes M4, or by M3 through screws.
▪ Wide alignment tolerances.
▪ Protected against inversion of power supply polarity and short circuits on output ports.

AGM

▪ Linear magnetic sensor, with direct reading of the absolute position.
▪ High performance, with a measuring length up to 30,000 mm.
▪ Resolutions up to 1 μm and repeatability ± 1 increment.
▪ Extremely easy and fast mounting of the entire measuring system, with wide alignment tolerances and
  sensor/magnetic band gap up to 1 mm.
▪ Serial interface SSI-BiSS (with or without 1 Vpp analog signal) or CANopen.
▪ SSI or CANopen protocol and programmable resolutions.
▪ Profibus-DP, Profinet, DeviceNet, ModBus and DRIVE-CLiQ protocols, through conversion gateways.
▪ High-speed serial data transfer.
▪ Small-sized, for applications with limited installation space.
▪ Magnetic band width 10 mm.
▪ Insensitive to dust and liquids (IP 67 protection class).
▪ Magnetic sensor body made of die-cast metallic material.
▪ High signal stability, even with high speed and accelerations.
▪ Cable suitable for continuous movements. Axial or radial cable output.
▪ Protected against inversion of power supply polarity and short circuits on output ports.
▪ Warning indication through LED.

MTV

▪ New line of magnetic sensors MTV, with small overall dimensions.
▪ Resolutions up to 0.1 μm. DPI resolution and inches reading now available.
▪ Many pole pitches available.
▪ Wide alignment tolerances and sensor/magnetic band distance up to 5 mm, for an even easier and faster mounting.
▪ Magnetic sensor body made of die-cast metallic material.
▪ Fixing of magnetic sensor by existing threaded holes M4, or by M3 through screws.
▪ Protected against inversion of power supply polarity and short circuits on output ports.



Vision 110

▪ One-axis digital readout, with 6 ½ digit LCD and negative sign.
▪ Metal sensor body of small overall dimensions.
▪ Fixing of magnetic sensor by existing threaded holes M4 or by M3 through screws.
▪ Power supply either via battery or external.
▪ Flexible cable max. length 4 m.
▪ Wide alignment tolerances.
▪ Several user-friendly functions available.
▪ Available in two different models:
  - VISION 110S: digital readout body of standard dimension, for drilling template 92x44 mm.
  - VISION 110L: digital readout body of standard dimensions and front of bigger size, for mounting on panel with
  drilling template 92x66 mm, or adjustable for standard drilling template (92x44 mm).
▪ To be used with magnetic band MP200 or MP100.

MP

Absolute or incremental magnetic band, composed by a magnetized plastoferrite strip, supported by a stainless steel carrier on which a double-sided tape is pre-mounted, for an extremely quick sticking and an easy fixing.






MR

MAGNETIC RING made of a magnetized ferrite ring with pole pitch of 2+2 mm or 5+5 mm, mounted on an aluminium flange for an easy application on the machine.

ACCESSORIES

CV103   Stainless steel protective cover
Non-magnetic stainless steel cover on which a double-sided tape is pre-mounted for a quick sticking and an easy fixing on the magnetic band.
Width 10 mm – Thickness 0.3 mm.

WARNING! It is not possible to use
the protective cover CV103
with the magnetic band MP100.


SP202   Aluminium support
To be fixed on the machine
to protect the magnetic band.

WARNING! It is not possible to use the support SP202 if the magnetic bands are already covered by CV103.


SME010  External zero reference for magnetic band
To be used with MTS and MTV sensors,
in E version.


SME010MR  External zero reference for magnetic ring
To be used with magnetic ring
MR200 and MR500


About Us

BENDIS ENGINEERING ЕООD is the exclusive representative of the world’s leading sheet/profile cutting and bending machine producers.

Stay Connected on:

    

Contacts

For general information about BENDIS ENGINEERING ЕООD please contact us at:
  This email address is being protected from spambots. You need JavaScript enabled to view it.
  00 359 31 272 207
  00359 877 942 703