▪ Miniaturized magnetic sensor MTR. Resolutions up to 0.5 µm programmable (Pr) via serial line.
▪ Remote interpolation unit.
▪ Magnetic sensor body made of die-cast metallic material.
▪ Fixing of magnetic sensor by existing threaded holes M4, or by M3 through screws.
▪ Wide alignment tolerances.
▪ Protected against inversion of power supply polarity and short circuits on output ports.
| MTR P Pole pitch 1+1 mm Pr |  |
| Pole pitch | 1+1 mm |
| Available resolutions | 10 - 5 - 1 - 0.5 μm |
| Accuracy | ± 10 µm |
| Reference indexes | C = at constant pitch (1 mm) |
| Repeatability | ± 1 increment |
| Output signals | LINE DRIVER / PUSH-PULL |
| Power supply | 5 ÷ 28 Vdc ± 5% |
| Max. frequency | 300 kHz |
| Max. traversing speed | up to 6 m/s |
| Protection class | IP 67 |
| MTR M Pole pitch 2+2 mm Pr | |
| Pole pitch | 2+2 mm |
| Available resolutions | 1,000 - 500 - 100 - 50 - 25 - 10 - 5 - 1 μm |
| Accuracy | ± 15 µm |
| Reference indexes | C = at constant pitch (2 mm) |
| Repeatability | ± 1 increment |
| Output signals | LINE DRIVER / PUSH-PULL |
| Power supply | 5 ÷ 28 Vdc ± 5% |
| Max. frequency | 300 kHz |
| Max. traversing speed | up to 12 m/s |
| Protection class | IP 67 |
| MTR H Pole pitch 5+5 mm Pr | |
| Pole pitch | 5+5 mm |
| Available resolutions | 250 - 100 - 50 - 25 - 10 - 5 μm |
| Accuracy | ± 40 µm |
| Reference indexes | C = at constant pitch (5 mm) |
| Repeatability | ± 1 increment |
| Output signals | LINE DRIVER / PUSH-PULL |
| Power supply | 5 ÷ 28 Vdc ± 5% |
| Max. frequency | 300 kHz |
| Max. traversing speed | up to 12 m/s |
| Protection class | IP 67 |