▪ Linear magnetic sensor, with direct reading of the absolute position.
▪ High performance, with a measuring length up to 30,000 mm.
▪ Resolutions up to 1 μm and repeatability ± 1 increment.
▪ Extremely easy and fast mounting of the entire measuring system, with wide alignment tolerances and
sensor/magnetic band gap up to 1 mm.
▪ Serial interface SSI-BiSS (with or without 1 Vpp analog signal) or CANopen.
▪ SSI or CANopen protocol and programmable resolutions.
▪ Profibus-DP, Profinet, DeviceNet, ModBus and DRIVE-CLiQ protocols, through conversion gateways.
▪ High-speed serial data transfer.
▪ Small-sized, for applications with limited installation space.
▪ Magnetic band width 10 mm.
▪ Insensitive to dust and liquids (IP 67 protection class).
▪ Magnetic sensor body made of die-cast metallic material.
▪ High signal stability, even with high speed and accelerations.
▪ Cable suitable for continuous movements. Axial or radial cable output.
▪ Protected against inversion of power supply polarity and short circuits on output ports.
▪ Warning indication through LED.
| AGM M Pole pitch 2+2 mm, SSI-BiSS interface |  |
| |
| Pole pitch | 2+2 mm |
| Resolution 1 Vpp | up to 1 μm |
| Resolution absolute measure | 500 - 100 - 50 - 10 - 5 - 1 µm |
| Signal period | 2 mm |
| Accuracy | ± 15 µm |
| Sensor - magnetic band gap | 0.3 ÷ 1 mm (with band MP200A) |
| Measuring length | up to 30,000 mm |
| Repeatability | ± 1 increment |
| Serial interface | SSI - BiSS |
| Power supply | 5 ÷ 28 Vdc ± 5% |
| Max. traversing speed | up to 5 m/s |
| Protection class | IP 67 |
| AGM M Pole pitch 2+2 mm, CANopen interface | |
| |
| Pole pitch | 2+2 mm |
| Resolution absolute measure | 100 - 50 - 10 - 5 - 1 µm |
| Signal period | 2 mm |
| Accuracy | ± 15 µm |
| Sensor - magnetic band gap | 0.3 ÷ 1 mm (with band MP200A) |
| Measuring length | up to 30,000 mm |
| Repeatability | ± 1 increment |
| Serial interface | CAN bus |
| CANopen profile | DS406 V. 3.1 |
| Max. traversing speed | up to 5 m/s |
| Protection class | IP 67 |
