▪ THESI 310 position controller can control shifting and positioning of one axis in 3 different operating modes:
- MANUAL, by keyboard;
- SEMI-AUTOMATIC, by keyboard;
- AUTOMATIC, on the basis of a memorized program.
▪ Possibility of storing up to 99 PROGRAMS with 20 positions each. Up to 99 repetitions can be matched to each position
(the program cycle is composed by the position and its respective repetitions).
▪ 90 Vac to 230 Vac power supply or 24 Vac power supply with selector.
▪ Manufactured with 16 bit microcontroller, 256K FLASH and 8K RAM memory in single-chip mode.
▪ Optoisolated inputs:
START, STOP, INCREASE CYCLE, DEVIATION, PRESET.
▪ Voltage-free contact outputs:
ENABLING WITH CONTROL INTERLOCK, OK POSITION, FEED / BACK, SLOW / FAST.
▪ ± 10 Vdc analog output:
FEED / BACK, SLOW / FAST, with linear ramp.
▪ Possibility of installation on bench or built in.
THESI 310 DI With relay outputs (digital)  | ||
| Display | POSITION: 6 high-efficiency digits h = 13 mm and negative sign CYCLES / PROGRAMS: 2+2 high-efficiency digits h = 9 mm |  |
| Encoder input signals | 2 square waves with phase displacement of 90° ± 10° and zero ref. 5 Vdc or 12 Vdc | |
| Axis input frequency | 20 kHzMAX | |
| Linear resolution | 200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 μm | |
| Protection class | keyboard IP 65 rear panel IP 40 | |
| Power | 10 WMAX | |
| Power supply | 90 to 230 Vac ± 10% - 50/60 Hz 24 Vac ± 10% - 50/60 Hz | |
| Digital outputs | N.O. relay contacts | |
| Inputs | optoisolated | |
| Connections | by removable terminal block | |
| Dimensions | front panel: 144x72 mm – depth: 126 mm | |
THESI 310 AN With analog output | ||
| Display | POSITION: 6 high-efficiency digits h = 13 mm and negative sign CYCLES / PROGRAMS: 2+2 high-efficiency digits h = 9 mm |  |
| Encoder input signals | 2 square waves with phase displacement of 90° ± 10° and zero ref. 5 Vdc or 12 Vdc | |
| Axis input frequency | 20 kHzMAX | |
| Linear resolution | 200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 μm | |
| Protection class | keyboard IP 65 rear panel IP 40 | |
| Power | 10 WMAX | |
| Power supply | 90 to 230 Vac ± 10% - 50/60 Hz 24 Vac ± 10% - 50/60 Hz | |
| Analog output | ± 10 Vdc optoisolated | |
| Inputs | optoisolated | |
| Connections | by removable terminal block | |
| Dimensions | front panel: 144x72 mm – depth: 126 mm | |